目录
1. 环境准备
2. 配置https的原因
3. 生成ca证书
4. 搭建harbor仓库
5. 访问harbor
6. 修改加密算法
1. 环境准备
需要提前安装docker和docker-compose，harbor仓库版本越新，对应的docker和docker-compose版本越新。
| 主机IP | 192.168.48.19 |
|---|---|
| docker版本 | 28.3.3 |
| docker-compose版本 | 2.39.1 |
2. 配置https的原因
为什么harbor要配置https？
如果不配置https的话会报下面的错：用户名或者密码不正确。
原因：
harbor修改了密码的加密算法，旧算法是sha256，新算法sha1，不巧的是这个算法http目前不支持，所以改为https。
HTTP主要使用以下加密算法：
TLS/SSL加密（HTTPS）
-
对称加密：AES、ChaCha20、3DES等
-
非对称加密：RSA、ECC、DSA等
-
密钥交换：ECDHE、DHE、RSA等
-
哈希算法：SHA256、SHA384、SHA512等（现代TLS已弃用SHA1）
HTTP摘要认证
-
使用MD5、SHA256等哈希算法
-
但不直接使用SHA1
3. 生成ca证书
mkdir -p /var/harbor/cert && cd /var/harbor/cert openssl genrsa -out ca.key 4096 openssl req -x509 -new -nodes -sha512 -days 3650 -subj "/C=CN/ST=Beijing/L=Beijing/O=example/OU=Personal/CN=192.168.48.19" -key ca.key -out ca.crt openssl genrsa -out 192.168.48.19.key 4096 openssl req -sha512 -new -subj "/C=CN/ST=Beijing/L=Beijing/O=example/OU=Personal/CN=192.168.48.19" -key 192.168.48.19.key -out 192.168.48.19.csr cat > v3.ext <<-EOF authorityKeyIdentifier=keyid,issuer basicConstraints=CA:FALSE keyUsage = digitalSignature, nonRepudiation, keyEncipherment, dataEncipherment extendedKeyUsage = serverAuth subjectAltName = @alt_names [alt_names] DNS.1=192.168.48.19 DNS.2=127.0.0.1 IP.1=192.168.48.19 EOF openssl x509 -req -sha512 -days 3650 -extfile v3.ext -CA ca.crt -CAkey
4. 搭建harbor仓库
wget https://github.com/goharbor/harbor/releases/download/v2.12.3/harbor-offline-installer-v2.12.3.tgz tar -zxf harbor-offline-installer-v2.12.3.tgz cp harbor.yml.tmpl harbor.yml
更改配置文件，下面是我的配置文件，IP根据自己的环境配置
# Configuration file of Harbor
# The IP address or hostname to access admin UI and registry service.
# DO NOT use localhost or 127.0.0.1, because Harbor needs to be accessed by external clients.
hostname: 192.168.48.19
# http related config
http:# port for http, default is 80. If https enabled, this port will redirect to https portport: 80
# https related config
https:# https port for harbor, default is 443port: 443# The path of cert and key files for nginxcertificate: /var/harbor/cert/192.168.48.19.crtprivate_key: /var/harbor/cert/192.168.48.19.key# enable strong ssl ciphers (default: false)# strong_ssl_ciphers: false
# # Harbor will set ipv4 enabled only by default if this block is not configured
# # Otherwise, please uncomment this block to configure your own ip_family stacks
# ip_family:
# # ipv6Enabled set to true if ipv6 is enabled in docker network, currently it affected the nginx related component
# ipv6:
# enabled: false
# # ipv4Enabled set to true by default, currently it affected the nginx related component
# ipv4:
# enabled: true
# # Uncomment following will enable tls communication between all harbor components
# internal_tls:
# # set enabled to true means internal tls is enabled
# enabled: true
# # put your cert and key files on dir
# dir: /etc/harbor/tls/internal
# Uncomment external_url if you want to enable external proxy
# And when it enabled the hostname will no longer used
# external_url: https://reg.mydomain.com:8433
# The initial password of Harbor admin
# It only works in first time to install harbor
# Remember Change the admin password from UI after launching Harbor.
harbor_admin_password: Harbor12345
# Harbor DB configuration
database:# The password for the user('postgres' by default) of Harbor DB. Change this before any production use.password: root123# The maximum number of connections in the idle connection pool. If it <=0, no idle connections are retained.max_idle_conns: 100# The maximum number of open connections to the database. If it <= 0, then there is no limit on the number of open connections.# Note: the default number of connections is 1024 for postgres of harbor.max_open_conns: 900# The maximum amount of time a connection may be reused. Expired connections may be closed lazily before reuse. If it <= 0, connections are not closed due to a connection's age.# The value is a duration string. A duration string is a possibly signed sequence of decimal numbers, each with optional fraction and a unit suffix, such as "300ms", "-1.5h" or "2h45m". Valid time units are "ns", "us" (or "µs"), "ms", "s", "m", "h".conn_max_lifetime: 5m# The maximum amount of time a connection may be idle. Expired connections may be closed lazily before reuse. If it <= 0, connections are not closed due to a connection's idle time.# The value is a duration string. A duration string is a possibly signed sequence of decimal numbers, each with optional fraction and a unit suffix, such as "300ms", "-1.5h" or "2h45m". Valid time units are "ns", "us" (or "µs"), "ms", "s", "m", "h".conn_max_idle_time: 0
# The default data volume
data_volume: /data/harbor
# Harbor Storage settings by default is using /data dir on local filesystem
# Uncomment storage_service setting If you want to using external storage
# storage_service:
# # ca_bundle is the path to the custom root ca certificate, which will be injected into the truststore
# # of registry's containers. This is usually needed when the user hosts a internal storage with self signed certificate.
# ca_bundle:
# # storage backend, default is filesystem, options include filesystem, azure, gcs, s3, swift and oss
# # for more info about this configuration please refer https://distribution.github.io/distribution/about/configuration/
# # and https://distribution.github.io/distribution/storage-drivers/
# filesystem:
# maxthreads: 100
# # set disable to true when you want to disable registry redirect
# redirect:
# disable: false
# Trivy configuration
#
# Trivy DB contains vulnerability information from NVD, Red Hat, and many other upstream vulnerability databases.
# It is downloaded by Trivy from the GitHub release page https://github.com/aquasecurity/trivy-db/releases and cached
# in the local file system. In addition, the database contains the update timestamp so Trivy can detect whether it
# should download a newer version from the Internet or use the cached one. Currently, the database is updated every
# 12 hours and published as a new release to GitHub.
trivy:# ignoreUnfixed The flag to display only fixed vulnerabilitiesignore_unfixed: false# skipUpdate The flag to enable or disable Trivy DB downloads from GitHub## You might want to enable this flag in test or CI/CD environments to avoid GitHub rate limiting issues.# If the flag is enabled you have to download the `trivy-offline.tar.gz` archive manually, extract `trivy.db` and# `metadata.json` files and mount them in the `/home/scanner/.cache/trivy/db` path.skip_update: false## skipJavaDBUpdate If the flag is enabled you have to manually download the `trivy-java.db` file and mount it in the# `/home/scanner/.cache/trivy/java-db/trivy-java.db` pathskip_java_db_update: false## The offline_scan option prevents Trivy from sending API requests to identify dependencies.# Scanning JAR files and pom.xml may require Internet access for better detection, but this option tries to avoid it.# For example, the offline mode will not try to resolve transitive dependencies in pom.xml when the dependency doesn't# exist in the local repositories. It means a number of detected vulnerabilities might be fewer in offline mode.# It would work if all the dependencies are in local.# This option doesn't affect DB download. You need to specify "skip-update" as well as "offline-scan" in an air-gapped environment.offline_scan: false## Comma-separated list of what security issues to detect. Possible values are `vuln`, `config` and `secret`. Defaults to `vuln`.security_check: vuln## insecure The flag to skip verifying registry certificateinsecure: false## timeout The duration to wait for scan completion.# There is upper bound of 30 minutes defined in scan job. So if this `timeout` is larger than 30m0s, it will also timeout at 30m0s.timeout: 5m0s## github_token The GitHub access token to download Trivy DB## Anonymous downloads from GitHub are subject to the limit of 60 requests per hour. Normally such rate limit is enough# for production operations. If, for any reason, it's not enough, you could increase the rate limit to 5000# requests per hour by specifying the GitHub access token. For more details on GitHub rate limiting please consult# https://docs.github.com/rest/overview/resources-in-the-rest-api#rate-limiting## You can create a GitHub token by following the instructions in# https://help.github.com/en/github/authenticating-to-github/creating-a-personal-access-token-for-the-command-line## github_token: xxx
jobservice:# Maximum number of job workers in job servicemax_job_workers: 10# The jobLoggers backend name, only support "STD_OUTPUT", "FILE" and/or "DB"job_loggers:- STD_OUTPUT- FILE# - DB# The jobLogger sweeper duration (ignored if `jobLogger` is `stdout`)logger_sweeper_duration: 1 #days
notification:# Maximum retry count for webhook jobwebhook_job_max_retry: 3# HTTP client timeout for webhook jobwebhook_job_http_client_timeout: 3 #seconds
# Log configurations
log:# options are debug, info, warning, error, fatallevel: info# configs for logs in local storagelocal:# Log files are rotated log_rotate_count times before being removed. If count is 0, old versions are removed rather than rotated.rotate_count: 50# Log files are rotated only if they grow bigger than log_rotate_size bytes. If size is followed by k, the size is assumed to be in kilobytes.# If the M is used, the size is in megabytes, and if G is used, the size is in gigabytes. So size 100, size 100k, size 100M and size 100G# are all valid.rotate_size: 200M# The directory on your host that store loglocation: /var/log/harbor
# Uncomment following lines to enable external syslog endpoint.# external_endpoint:# # protocol used to transmit log to external endpoint, options is tcp or udp# protocol: tcp# # The host of external endpoint# host: localhost# # Port of external endpoint# port: 5140
#This attribute is for migrator to detect the version of the .cfg file, DO NOT MODIFY!
_version: 2.12.0
# Uncomment external_database if using external database.
# external_database:
# harbor:
# host: harbor_db_host
# port: harbor_db_port
# db_name: harbor_db_name
# username: harbor_db_username
# password: harbor_db_password
# ssl_mode: disable
# max_idle_conns: 2
# max_open_conns: 0
# Uncomment redis if need to customize redis db
# redis:
# # db_index 0 is for core, it's unchangeable
# # registry_db_index: 1
# # jobservice_db_index: 2
# # trivy_db_index: 5
# # it's optional, the db for harbor business misc, by default is 0, uncomment it if you want to change it.
# # harbor_db_index: 6
# # it's optional, the db for harbor cache layer, by default is 0, uncomment it if you want to change it.
# # cache_layer_db_index: 7
# Uncomment external_redis if using external Redis server
# external_redis:
# # support redis, redis+sentinel
# # host for redis: <host_redis>:<port_redis>
# # host for redis+sentinel:
# # <host_sentinel1>:<port_sentinel1>,<host_sentinel2>:<port_sentinel2>,<host_sentinel3>:<port_sentinel3>
# host: redis:6379
# password:
# # Redis AUTH command was extended in Redis 6, it is possible to use it in the two-arguments AUTH <username> <password> form.
# # there's a known issue when using external redis username ref:https://github.com/goharbor/harbor/issues/18892
# # if you care about the image pull/push performance, please refer to this https://github.com/goharbor/harbor/wiki/Harbor-FAQs#external-redis-username-password-usage
# # username:
# # sentinel_master_set must be set to support redis+sentinel
# #sentinel_master_set:
# # db_index 0 is for core, it's unchangeable
# registry_db_index: 1
# jobservice_db_index: 2
# trivy_db_index: 5
# idle_timeout_seconds: 30
# # it's optional, the db for harbor business misc, by default is 0, uncomment it if you want to change it.
# # harbor_db_index: 6
# # it's optional, the db for harbor cache layer, by default is 0, uncomment it if you want to change it.
# # cache_layer_db_index: 7
# Uncomment uaa for trusting the certificate of uaa instance that is hosted via self-signed cert.
# uaa:
# ca_file: /path/to/ca
# Global proxy
# Config http proxy for components, e.g. http://my.proxy.com:3128
# Components doesn't need to connect to each others via http proxy.
# Remove component from `components` array if want disable proxy
# for it. If you want use proxy for replication, MUST enable proxy
# for core and jobservice, and set `http_proxy` and `https_proxy`.
# Add domain to the `no_proxy` field, when you want disable proxy
# for some special registry.
proxy:http_proxy:https_proxy:no_proxy:components:- core- jobservice- trivy
# metric:
# enabled: false
# port: 9090
# path: /metrics
# Trace related config
# only can enable one trace provider(jaeger or otel) at the same time,
# and when using jaeger as provider, can only enable it with agent mode or collector mode.
# if using jaeger collector mode, uncomment endpoint and uncomment username, password if needed
# if using jaeger agetn mode uncomment agent_host and agent_port
# trace:
# enabled: true
# # set sample_rate to 1 if you wanna sampling 100% of trace data; set 0.5 if you wanna sampling 50% of trace data, and so forth
# sample_rate: 1
# # # namespace used to differentiate different harbor services
# # namespace:
# # # attributes is a key value dict contains user defined attributes used to initialize trace provider
# # attributes:
# # application: harbor
# # # jaeger should be 1.26 or newer.
# # jaeger:
# # endpoint: http://hostname:14268/api/traces
# # username:
# # password:
# # agent_host: hostname
# # # export trace data by jaeger.thrift in compact mode
# # agent_port: 6831
# # otel:
# # endpoint: hostname:4318
# # url_path: /v1/traces
# # compression: false
# # insecure: true
# # # timeout is in seconds
# # timeout: 10
# Enable purge _upload directories
upload_purging:enabled: true# remove files in _upload directories which exist for a period of time, default is one week.age: 168h# the interval of the purge operationsinterval: 24hdryrun: false
# Cache layer configurations
# If this feature enabled, harbor will cache the resource
# `project/project_metadata/repository/artifact/manifest` in the redis
# which can especially help to improve the performance of high concurrent
# manifest pulling.
# NOTICE
# If you are deploying Harbor in HA mode, make sure that all the harbor
# instances have the same behaviour, all with caching enabled or disabled,
# otherwise it can lead to potential data inconsistency.
cache:# not enabled by defaultenabled: false# keep cache for one day by defaultexpire_hours: 24
# Harbor core configurations
# Uncomment to enable the following harbor core related configuration items.
# core:
# # The provider for updating project quota(usage), there are 2 options, redis or db,
# # by default is implemented by db but you can switch the updation via redis which
# # can improve the performance of high concurrent pushing to the same project,
# # and reduce the database connections spike and occupies.
# # By redis will bring up some delay for quota usage updation for display, so only
# # suggest switch provider to redis if you were ran into the db connections spike around
# # the scenario of high concurrent pushing to same project, no improvement for other scenes.
# quota_update_provider: redis # Or db
启动harbor仓库
./install.sh
成功输出：
✔ Network harbor_harbor Created 0.0s ✔ Container harbor-log Started 0.2s ✔ Container redis Started 0.8s ✔ Container registryctl Started 0.5s ✔ Container harbor-db Started 0.5s ✔ Container registry Started 0.8s ✔ Container harbor-portal Started 0.8s ✔ Container harbor-core Started 0.9s ✔ Container harbor-jobservice Started 1.1s ✔ Container nginx Started 1.1s ✔ ----Harbor has been installed and started successfully.----
5. 访问harbor
harbor地址：192.192.48.1
6. 修改加密算法
如果还是显示密码错误，那就到数据库里面改加密算法
[root@database harbor]# docker ps | grep db 349bac5a56c4 goharbor/harbor-db:v2.12.3 "/docker-entrypoint.…" 5 minutes ago Up 5 minutes (healthy) harbor-db [root@database harbor]# docker exec -it 349bac5a56c4 /bin/bash postgres [ / ]$ psql -d postgres psql (15.12) Type "help" for help. postgres=# \c registry You are now connected to database "registry" as user "postgres". registry=# select * from harbor_user; # 查看用户表可以看到相关信息 # 将harbor_user表中的admin用户的加密算法改为sha1，密码改为Harbor12345 registry=# update harbor_user set password='a71a7d0df981a61cbb53a97ed8d78f3e', salt='ah3fdh5b7yxepalg9z45bu8zb36sszmr', password_version='sha1' where username=' admin';
然后重启harbor就可以正常登录了。
#到harbor目录下 docker down docker up -d
如何分析MySQL的锁等待问题？)
)
